
Today’s homes need more power than ever. Heat pumps, EVs in the garage, home offices, and new appliances all draw on the same electrical panel. When that panel can’t keep up, you get flickering lights, tripped breakers, and real safety risks. Allegiance Heating & Air’s Electrical Department serves Louisville and Southern Indiana with four core services: electrical panel upgrades, EV and Tesla charger installation, dedicated circuits, and breaker and circuit troubleshooting.
We’ve been serving local homeowners since 2005, and our licensed electrical team brings that same honest, no-pressure approach to electrical work. We’ll explain what we find, give you clear options, and let you decide.
Your electrical panel sends power to every circuit in your home. Many older Louisville and Southern Indiana homes still run on 60- or 100-amp service that was never built for central air, heat pumps, or EV chargers. An electrical panel upgrade gives your home the capacity it needs now, plus room to grow.
Signs you may need a panel upgrade:
A 100-amp panel can handle a smaller home with gas heat and few major appliances. Most of today’s homes do better with 200-amp service, especially homes with electric heat pumps, electric ranges, or an EV. When we visit, we’ll do a load calculation and tell you what your home actually needs, so you don’t pay for more panel than you’ll use.
When your panel is damaged, outdated, or unsafe, we’ll replace it with a new panel and new breakers. Panel work usually needs a permit and a local inspection. We’ll pull the permit, coordinate with your utility if your service needs to be shut off or upgraded, and make sure the job passes inspection.
A standard 120-volt outlet adds just a few miles of range per hour, which won’t cover a daily commute across Louisville. A Level 2 home charger runs on a 240-volt dedicated circuit and can fully charge most EVs overnight. Our electric car charger installation service covers the whole job: checking your panel’s capacity, running the new circuit to your garage or driveway, mounting the charger, and testing it.
If you drive a Tesla, the Tesla Wall Connector is the natural choice. On the right circuit, it can add up to about 44 miles of range per hour, depending on your model. Many newer EVs from other brands now use the same charging port, so a Wall Connector can work for a future car too. Whether you’ve already bought your charger or want advice on which one to get, we can install it.
Both are Level 2 chargers. Universal Level 2 chargers use the J1772 plug found on many non-Tesla EVs and can charge a Tesla with an adapter. The Wall Connector is built for Tesla and other cars with the same port. Either way, the right breaker size, wire gauge, and location matter more than the brand. We’ll help you choose a setup that fits your car, your panel, and your driving habits.
A dedicated circuit powers one appliance and nothing else. Large equipment that shares a circuit with other loads can trip breakers, run poorly, and wear out sooner. Electrical code requires dedicated circuits for many major appliances, and adding them is one of the simplest ways to protect your equipment.
We install dedicated circuits for:
HVAC is where we know electrical best. If you’re replacing your system or upgrading to a new Daikin heat pump, our team can make sure the circuit, breaker, and disconnect match the new equipment. A system on the right circuit starts more easily, runs more efficiently, and is less likely to leave you without heat or AC.
A breaker that trips is doing its job: it shuts off power before a problem becomes a fire hazard. A breaker that trips repeatedly is telling you something is wrong. Our circuit breaker repair and troubleshooting service finds the cause, rather than just flipping the switch back on. Troubleshooting starts with a diagnostic visit, which carries a diagnostic fee. We’ll explain what we find and your repair options before any work begins.
Call us if you notice:
If it’s the breaker for your air conditioner or heat pump that keeps tripping, the problem may be in the equipment, such as a failing capacitor or a struggling compressor. An electrician who doesn’t work on HVAC may never check the unit itself. Our team understands both the electrical side and the HVAC side, so we can find the real cause and fix it in one visit.
Want to catch electrical issues before they shut down your system? Our Service Club maintenance plan visits include checking voltage and amperage on your HVAC equipment.
We proudly serve Louisville and nearby Kentucky communities, including Prospect, La Grange, and Mount Washington, as well as New Albany, Jeffersonville, Clarksville, and the rest of Southern Indiana.
Not always. A Level 2 charger usually needs a 40- to 60-amp circuit. Many 200-amp panels have room for that. Older 100-amp panels often don’t. We’ll perform a load calculation before installation and let you know if an upgrade is needed.
In most areas, panel upgrades, new circuits, and EV charger installations require a permit and an inspection. Our team handles the permit, the inspection, and any utility coordination in-house, so you don’t have to.
Most panel upgrades are done in one day. Your power will be off for part of that time. If your utility needs to upgrade your service, we’ll coordinate with them and let you know the timeline upfront.
Resetting a breaker once is fine. If it trips again right away, or keeps tripping, leave it off and call us. Repeated trips point to an overload, a short, or a failing breaker.
A standby generator connects to your panel through a transfer switch. If your panel is older or near capacity, we may recommend an upgrade before your generator installation. Our Electrical and Backup Power teams can plan both jobs together.
Whether you need a new panel, a home EV charger, or a new dedicated circuit, Allegiance Heating & Air is here to help. Contact us or request your free estimate today. Dealing with a breaker that won’t stop tripping? Schedule a diagnostic visit and we’ll find the cause.
