Heat Pump Installation & Replacement in New Albany, IN

Eliminate Inconsistent Temperatures and Rising Energy Bills

Dealing with an HVAC system that leaves cold spots in the winter or fails to dehumidify during humid New Albany summers creates unnecessary stress for homeowners. Schedule a comprehensive system assessment or discuss zero-interest financing options today.

Allegiance Heating & Air, LLC. understands that a failing system is more than an inconvenience; it is a disruption to your daily life and a drain on your finances. When your current unit struggles to maintain a set temperature, runs continuously without cycling off, or produces strange noises, it signals that the equipment can no longer handle the local climate demands. Our certified technicians provide precision heat pump installation and replacement services designed to restore immediate comfort and long-term efficiency to your home:

• Achieve optimal home comfort with energy-efficient heat pump systems designed for dual-fuel applications.
• Expert installation within 24 hours—minimizing downtime and discomfort.
• Competitive pricing with flexible financing options to fit any budget.
• All installations are fully permitted, warrantied, and tailored to local climate needs.

Comprehensive Heat Pump Replacement Services

Modern heat pumps offer a sophisticated solution for year-round climate control, acting as a primary heating and cooling source. However, the efficiency of these systems relies entirely on the quality of the installation. A high-performance unit installed incorrectly will never achieve its rated efficiency (SEER2 or HSPF2), leading to wasted energy and shortened equipment lifespan. When you choose professional replacement, you are investing in a system that manages both the humid Indiana summers and the freezing winters with precision.

We provide a complete turnkey solution for homeowners looking to upgrade their infrastructure. This includes the removal and environmentally safe disposal of old equipment, necessary modifications to ductwork transitions, and the integration of smart thermostats for enhanced control. The scope of our service covers air-source heat pumps, ductless mini-split configurations for homes without existing ductwork, and hybrid (dual-fuel) systems that pair an electric heat pump with a gas furnace for maximum efficiency during extreme cold snaps.

By upgrading to a modern system, homeowners gain access to variable-speed technology. Unlike older single-stage units that run at 100% capacity or zero, variable-speed compressors adjust their output in tiny increments. This results in ultra-quiet operation, superior humidity control, and a significant reduction in electrical consumption. Our team ensures that every component, from the outdoor condenser to the indoor air handler, is matched perfectly to deliver the performance you paid for.

The Installation and Commissioning Process

A correct installation follows a strict, technical protocol to ensure the longevity of the system. We do not guess when it comes to the comfort of your home. The process begins with accurate load calculations and ends with rigorous testing to verify system pressures and airflow:

• Load Calculation and Sizing: Before any equipment is ordered, we perform a Manual J load calculation. This assesses the square footage, insulation levels, window types, and orientation of your home in New Albany. An oversized unit will short-cycle, leading to high humidity and wear, while an undersized unit will run perpetually without reaching the thermostat setting. We ensure the unit is sized exactly for your thermal envelope.
• Site Preparation and Protection: Technicians prepare the workspace to protect your property. Drop cloths are used, and safety measures are taken to disconnect high-voltage electrical lines and gas supplies (if applicable) before removing the existing unit.
• Ductwork Inspection: We inspect the accessible ductwork for leaks or disconnections. A new heat pump cannot perform efficiently if the distribution system is losing air to the attic or crawlspace. Any necessary sealing or modification is handled prior to the new install.
• Equipment Placement and Connection: The outdoor unit is set on a level, composite pad to prevent shifting or vibration. Refrigerant lines are brazed with nitrogen to prevent oxidation inside the copper, a critical step often skipped by budget installers. We then evacuate the system to 500 microns to remove all moisture and non-condensables.
• System Commissioning: Once the refrigerant is weighed in to the manufacturer’s exact specifications, we test the system in both heating and cooling modes. We measure static pressure, temperature rise/drop, and voltage amp draws to confirm the unit is operating within factory parameters.

When to Replace vs. Repair Your Heat Pump

Deciding between another repair bill and a full system replacement is a common dilemma. While repairs are sometimes the right choice for minor issues, there comes a point where sinking money into an aging system is no longer finically viable — view our specials. Understanding the threshold for replacement helps you avoid throwing good money after bad:

• The 50% Rule: If the cost of a necessary repair approaches 50% of the value of a new system, replacement is generally the smarter financial move. Major component failures, such as a compressor or leaking evaporator coil, often fall into this category.
• Age of the Equipment: Heat pumps typically last 10 to 15 years. If your unit is over 12 years old and requires a significant repair, technology has advanced enough that a new unit will likely pay for itself in energy savings within a few years.
• Refrigerant Type: Older systems utilize R-22 refrigerant, which has been phased out and is now prohibitively expensive to source. If your R-22 system has a leak, upgrading to a system that uses R-410A or newer low-GWP refrigerants is the only long-term solution.
• Declining Comfort: If some rooms are always too hot or too cold, or if the humidity levels in your home feel uncontrolled despite the AC running, the system’s compressor valves may be wearing out, or the unit may have been improperly sized initially.
• Rising Energy Bills: A steady increase in kilowatt-hour usage without a change in weather or habits indicates the system is losing efficiency. Heat pumps work harder as internal components wear, drawing more power to produce the same amount of conditioning.

Local Considerations for Indiana Homeowners

Operating a heat pump in this region requires specific attention to local climate patterns and regulations. Indiana weather fluctuates drastically, with hot, muggy summers reaching the upper 80s and winters that drop well below freezing, accompanied by snow and ice. A standard heat pump installation that works in a mild climate will fail here without the proper setup.:

• Defrost Cycles and Snow Management: Because winters in New Albany involve snow and freezing rain, the outdoor unit must be elevated on "snow legs" or a riser pad. This prevents snow accumulation from blocking airflow around the coil. Additionally, we verify the defrost control board is set correctly so the unit can melt ice off the outdoor coil efficiently without leaving you in the cold.
• Auxiliary Heat Requirements: Standard air-source heat pumps lose heating capacity as the outdoor temperature drops. For our climate, it is essential to have a reliable backup heat source. This is typically an electric resistance heat strip or, in a dual-fuel system, a gas furnace. We configure the "lockout temperature" on your thermostat to switch to auxiliary heat automatically when the heat pump becomes inefficient, ensuring your pipes never freeze and your home stays warm.
• Permits and Code Compliance: All HVAC replacements in the area require proper permitting to ensure safety and code compliance. We handle the entire administrative process, pulling the necessary permits and scheduling inspections. This protects your home’s value and ensures that the electrical and mechanical work meets current safety standards.
• Utility Rebates and Incentives: Local utility providers and federal programs often offer rebates for upgrading to high-efficiency heat pumps. These incentives change frequently. We assist in identifying current rebate programs for high-SEER2 equipment to help offset the initial investment cost.

Why Technical Expertise Matters

In the HVAC industry, the most important day of a heat pump’s life is the day it is installed. A top-tier brand installed poorly will fail sooner and run less efficiently than a budget brand installed perfectly. The difference lies in the technical details: proper brazing techniques, correct refrigerant charge, and accurate airflow setup.

We employ a team of technicians who are not just installers but skilled tradespeople. They undergo continuous training to stay ahead of industry changes, such as the shift toward inverter-driven compressors and smart home integration. We do not use subcontractors for our core installations, ensuring that the quality of work remains consistent and accountable.

Your home requires a custom solution, not a one-size-fits-all package. We evaluate the ductwork infrastructure, return air pathways, and insulation values to propose a system that delivers balanced air pressure and consistent temperatures. Allegiance Heating & Air, LLC. prioritizes transparency in our scope of work, so you understand exactly what is being installed and how it improves your home’s energy profile.

Furthermore, we stand behind our workmanship with robust labor warranties that complement the manufacturer's equipment warranty. This provides peace of mind that if an issue arises post-installation, it will be resolved quickly and without unexpected costs. We believe that a professional installation is the foundation of a comfortable home, and we refuse to cut corners on the materials or time required to do the job right.

Secure Your Comfort Today

Don't wait for your system to fail during the peak of summer heat or a winter freeze. Proactive replacement gives you control over the timeline, the budget, and the equipment selection. A modern, high-efficiency heat pump transforms the feel of your home, providing consistent comfort and lower utility bills immediately.

Trust the team that prioritizes technical accuracy and customer transparency. Contact Allegiance Heating & Air, LLC. today to schedule your consultation and take the first step toward a more comfortable, energy-efficient home. Schedule your heat pump installation estimate now!